MSO2012数字荧光示波器
串行总线触发和解码
- I2C, SPI, CAN, LIN, 和RS-232/422/485/UART串行触发、解码和分析选项
MSO2012数字荧光示波器易用功能
- Wave Inspector® 导航和搜索提供了前所未有的波形分析效率
- FilterVu™ 可变低通滤波器可以滤掉不想要的信号噪声，同时仍捕获高频事件
- 英寸(180 mm)宽屏TFT-LCD彩色显示器
- 前面板上USB 2.0端口，迅速简便地存储数据
- 后面板上USB 2.0设备端口，使用USBTMC通过PC直接控制示波器，或直接打印到任何兼容PictBridge® 的打印机
- 即插即用PC连接和分析软件解决方案
- TekVPI® 探头接口，支持有源探头、差分探头和电流探头，自动定标和确定度量单位
- 体积小，重量轻，深仅5.3 英寸(134mm)，重仅7 磅14 盎司(3.6 公斤)
混合信号设计和分析(MSO2000 系列)
- 能够时间相关最多4 条模拟和16 条数字通道
- 并行总线触发和分析
- 多通道建立时间和保持时间触发
- 下一代数字波形显示
MSO2012数字荧光示波器应用
- 嵌入式设计和调试
- 混合信号设计和调试
- 电源测量
- 汽车电子
- 教育和培训
- 视频设计和调试
泰克MSO2000 和DPO2000 系列数字荧光示波器
多功能混合信号设计调试工具
杰出的处理能力，迅速解决问题 - MSO2000和DPO2000系列数字荧光示波器 (DPO)
为您查看信号和迅速解决问题提供了所需的性能和工具。
DPO2000 系列是第一个在所有通道上提供了1M 点可用记录长度、串行触发和解码分析选项、可变低通滤波器、
允许直到示波器全部带宽查看信号细节及体积小巧的示波器。MSO2000系列增加了16 条集成数字通道，
可以在一台仪器上查看和时间相关模拟信号和数字信号。这种集成能力把触发功能扩展到全部20 条通道中，
为调试模拟和数字混合设计提供了理想的解决方案。
MSO2000 和DPO2000 系列上的数字荧光技术实现了5,000 个波形/ 秒的波形捕获速率和实时辉度等
MSO2012数字荧光示波器专业设计，让您的工作更轻松
Wave Inspector® 导航和搜索
想象一下如果没有谷歌和雅虎之类的搜索引擎，没有收藏夹之类的网络浏览器功能，没有链接，没有AOL和
MSN 之类的互联网服务供应商，您将不能有效地利用互联网！那么，您现在就会知道，当真正试图使用数字示波器
的长记录长度时，大多数现代示波器用户的感受了。记录长度是示波器的关键指标之一，
是指可以在一次采集中数字化和存储的样点数量。记录长度越长，能够以高分辨率(高采样率)捕获的时间窗口越长。
世界上第一部数字示波器只能捕获和存储500个样点，对调查的事件很难采集所有相关信息。多年来，
示波器厂商已经提供越来越长的记录长度，以高分辨率满足长捕获窗口的需求，高分辨率要么已经成为
目前大多数中档示波器的标准配置，要么用户可以选择升级到几兆样点的记录长度。这些几兆样点的记录
长度通常代表着几千个屏幕的信号活动。尽管几年来标准记录长度已经明显提高，现在已经能够满足市场
上绝大部分应用需求，但直到现在，经济高效地查看、观测和分析长记录长度采集的工具一直没有引起人们的重视。
泰克MSO/DPO2000 系列通过下述WaveInspector 创新控制功能，满足了处理长记录长度的需求。:
Wave Inspector 控制功能在查看、导航和分析波形数据方面实现了前所未有的效率。通过旋转外部卷动控制功能(2)，
您可以浏览1M 点记录，在几秒钟内从开头浏览到结尾。想查看感兴趣的事件、
想查看更多的细节？您只需旋转内部缩放控制功能(1)就可以
放大/卷动显示– 专用两级前面板旋钮可以直观地控制缩放和卷动显示。内部旋钮调节缩放系数(或缩放标度)，
顺时针旋转，可以激活缩放，逐渐提高放大系数；反时针旋转，可以降低放大系数，最终关Wave Inspector控制功能在查看、
导航和分析波形数据方面实现了前所未有的效率。通过旋转外部卷动控制功能(2)，您可以浏览1M 点记录，
在几秒钟内从开头浏览到结尾。想查看感兴趣的事件、想查看更多的细节？您只需旋转内部缩放控制功能(1)就可以。
闭缩放功能。外部旋钮在波形中卷动缩放框，迅速得到用户感兴趣的波形部分。外部旋钮还采用应力感应式设计，
确定卷动波形的速度。外部旋钮旋转得越快，缩放框卷动的速度越快。通过反方向旋转旋钮，可以改变卷动方向。
您不必再经过多个菜单，调节缩放视图。
播放/ 暂停 – 在寻找异常事件或感兴趣的事件时，前面板上的专用播放/暂停按钮在显示屏中自动滚动播放波形。
播放速度和方向使用直观的卷动旋钮进行控制。旋钮旋转得越快，波形滚动速度越快。通过反方向旋转旋钮，可以改变卷动方向。
用户标记 – 看到波形上有感兴趣的东西？在前面板按Set Mark 按钮，可以在波形上放置一个或多个"书签"。
在不同标记之间导航，只需在前面板上按 Previous (←) 和 Next (→) 按钮。
搜索标记 – 不想花时间考察整个采集的波形、找到正在寻找的事件? MSO/DPO2000系列具有强大的波形搜索功能，
可以根据用户定义的标准搜索长时间采集的数据。搜索标记会高亮度显示所有事件发生，并可以使用前面板
Previous (←) 和 Next (→) 按钮简便地搜索。搜索类型包括边沿、脉宽、矮脉冲、逻辑建立时间和保持时间、
上升时间/ 下降时间及 I2C、SPI、RS232/422/485/UART、CAN和LIN
数据包内容。
搜索步骤1：定义要查找的项目
搜索步骤2：MSO/DPO2000 自动搜索记录，用白色空心三角形标记每个事
搜索步骤3：使用上一个和下一个按钮，从一个事件跳到下一个事件
Optional LAN and VGA video ports! – Connect your oscilloscope to your network to remotely
control and collect data. Display your screen on an external monitor or projector.
Only 5.3 inches deep! – Free up valuable space on your bench or desktop.
亲身体验MSO/DPO2000 系列操作f.
串行触发和分析
需要长记录长度的最常用的应用之一是在嵌入式系统设计中进行串行数据分析。嵌入式系统可谓无所不在。
它们可能包含许多不同类型的设备，如微处理器、微控制器、DSP、RAM、EPROM、FPGA、ADC、DAC 和I/O。
传统上，各种设备一直使用宽并行总线相互通信及与外部世界通信。
但是，今天，越来越多的嵌入式系统正在用串行总线代替这些宽并行总线，因为其要求的电路板空间更少，
针脚数量更少，功率更低，并采用嵌入式式时钟和差分信号，提高了抗噪声能力，最重要的是其成本要更低。
此外，著名的制造商们提供了大量的构件组件，可以迅速开发设计。
尽管串行总线有大量的优势，但它们也带来了其前身(并行总线)从未面临的重大挑战。调试总线和系统问题变得更加困难，
因为隔离感兴趣的事件变得更加困难，解释示波器屏幕上显示的内容变得更加困难。
MSO2000 和DPO2000 系列解决了这些挑战，为处理串行总线的工程师提供了最优异的工具，
如I2C, SPI, RS-232/422/485/UART, CAN, 和 LIN.
MSO/DPO2000 触发经过I2C 总线的某个数据包，不再计算时钟边沿及1 和0 数量。
总线波形提供解码后的数据包内容，包括包头、地址、读/ 写、数据和包尾。增加定时波形可以迅速简便地确定两个信号的值
总线显示 – 可以更高级地组合查看构成总线的各个信号(时钟, 数据, 片选等)，
可以更加简便地识别数据包在哪里开始和结束，识别地址、数据、标识符、CRC等子数据包成分。
串行触发– 在流行的串行接口(如 I2C, SPI, RS232/422/485/UART, CAN和LIN)上，
在数据包开始、特定地址、特定数据内容等数据包内容上触发采集。
总线解码– 厌倦了不得不目视检查波形，计算时钟，确定每个位是1 还是0，把多个位组合成字节，
确定十进制值？让示波器为您完成这些工作！一旦设置了总线，示波器将解码总线上的每个数据包，
以十六进制、二进制、十进制(仅LIN)或ASCII (视标准而定)格式显示总线波形中的值。.
事件表 – 除查看总线波形自己的解码包数据外，您还可以在表格视图中查看所有捕获的数据包，
这在很大程度上与逻辑分析仪上查看数据的方式类似。它在数据包上打上时戳，连续列出数据包，
包括每个组成部分的栏目(地址, 数据等等)。还可以导出事件离线使用。
搜索– 串行触发特别适合隔离感兴趣的事件，但一旦捕获事件、并需要分析周围数据，您要怎么做？
过去，用户必须手动滚动通过波形，计算和转换位，查看是什么导致了事件。有了MSO/DPO2000系列，
您可以让示波器根据用户定义的标准搜索采集的数据，包括串行数据包成分。
每次事件发生都用搜索标记高亮度显示。为在不同标记之间快速搜索，只需在前面板上按Previous (←) 和 Next (→) 按钮。
MSO2000 系列使用的P6316 数字探头简化了与被测设备的连接
混合信号设计和分析(MSO2000 系列)
作为嵌入式设计工程师，您面临着系统复杂度不断提高的挑战。典型的嵌入式设计可能包含各种各样的模拟信号、
高速和低速串行数字通信和微处理器总线、等等。串行协议，如I2C 和SPI，经常用于芯片间通信，
而许多应用仍在使用并行总线。微处理器、FPGA、模数转换器(ADCs)和数模转换器(DACs)等
IC给当前的嵌入式设计带来了独特的测量挑战。MSO2000系列混合信号示波器增加了16 条数字通道。
这些通道紧密集成到示波器的用户界面中，简化了操作，可以轻松解决混合信号问题。
下一代数字波形显示
为不断提高混合信号示波器的易用性，MSO2000系列重新界定了查看数字波形的方式。
逻辑分析仪和混合信号示波器面临的一个共同的问题是在放大得足够大，以便数字轨迹在显示屏上保持平坦时，
确定数据是1 还是0。MSO2000 在数字轨迹上标有色码，用绿色显示1，用蓝色显示0。
此外，在样点之间存在不确定性时，MSO2000在数字通道跳变点周围会显示白边。这以看得见的方式提醒您，
与前一个设置可以采集的信息相比，提高下一次采集的采样率将揭示频率更高的信息。
与传统示波器相比，MSO 上的通道设置通常会非常耗时。这一过程通常包括探测被测设备，标记通道，
确定通道在屏幕上的位置。MSO2000 简化了这一过程，允许用户对数字波形分组，使用USB 键盘输入波形标记。
您只需简单地并排放置数字波形，就会构成一个组。在构成一个组之后，您可以确定该组中包含的所有通道的位置，
从而大大缩短单独定位各条通道所需的正常设置时间。
P6316 MSO 探头
这种独特的探头设计提供了两个8 通道适配夹，简化连接被测设备的过程。在连接到方形引脚时，
P6316 可以直接连接中心相距10 英寸的8x2 方形引脚头。在要求更高的连接灵活性时，
您可以使用标配飞线束和抓斗，夹到表面安装设备或测试点上。P6316 提供了杰出的电气特点，
在101 kΩ 输入阻抗时，应用的负荷仅8 pF。
(DAC信号输出)。注意FilterVuTM怎样在前景轨迹(黄色)中清楚地显示DAC的无噪声阶跃，
其中已经去掉了所有高于5.5 kHz 的频率。FilterVu 还直到示波器的全部带宽，捕获及在背景轨迹中(橙色)中显示高频毛刺g
FilterVu™ 可变低通滤波器
厌倦了示波器中受限于20 MHz带宽滤波器？您只需启动FilterVu，调节可变低通噪声滤波器就可以了。
与其它可变低通滤波器不同，FilterVu 从信号中滤掉了不想要的噪声，
同时仍能用示波器的全部带宽捕获毛刺和其它信号细节。它显示两个波形：一个可以滤波的波形(前景)和一个毛刺捕获波形(背景)。
滤波的波形使用可变低通滤波器，滤除噪声，获得更干净的波形，更精确地定位信号边沿和幅度电平。
其结果，改善了您对光标测量的信心，更清楚地存档重要的信号特点。
在噪声滤波器调节到最低可用噪声截止频率时，过去可能导致示波器出现假信号的不超过1% 的高频成分现在可以通过滤波器。
毛刺捕获波形会直到示波器的全部带宽显示信号细节。示波器可以使用峰值检测min/max采样，
捕获最窄5 ns的脉冲，防止漏掉意想不到的毛刺或其它高频事件。
FilterVu 为重复事件、非重复事件和单次事件提供了理想的解决方案。
简便捕获、保存和分析测量结果.
PC 连接和USB 数据存储
MSO2000和DPO2000系列标配USB主机端口和设备端口，支持可拆卸数据存储、无缝PC 连接和直接打印，
为数据传送提供了灵活性。另外其还可以选配GPIB、LAN 和视频输出适配器。
OpenChoice® Desktop PC通信软件简便地捕获、保存和分析测量结果。您只需把截图和波形拉到独立的
桌面应用中或直接拉到Microsoft Word和Excel中。作为OpenChoice 的补充，
National Instruments LabVIEW SignalExpressTM泰克版软件提供了扩展功能，包括高级分析、
远程示波器控制和实时波形分析。如果您不想使用PC，您也可以使用USB设备端口，
把图像直接打印到任何兼容P i c tBridge® 的打印机上。
OpenChoice® Desktop
NI LabVIEW SignalExpress™ 泰克版软件－ 泰克与National Instruments联合开发的全面互动的测量采集和分析软件，为MSO/DPO2000 系列专门优化。
e*Scope 可以从任何联网的PC上通过传统浏览器界面控制联网的示波器e
TekVPI® Probing
TekVPI 探头接口确立了探测的简便易用性标准。TekVPI 探头拥有状态指示灯和控制功能，
在输入补偿框右面有一个探头菜单按钮。这个按钮会在示波器显示屏上调出一个探头菜单，
其中包括所有探头相关设置及控制功能。TekVPI 接口采用新的探头电源管理结构，
可以直接连接电流探头(要求TekVPI外部电源-泰克部件编号: 119-7465-xx)。
最后，可以使用USB、GPIB 或以太网远程控制TekVPI 探头，在ATE 环境中提供了用途更广泛的解决方案。
Characteristics
Vertical System – Analog Channels
| Vertical System Analog Channels | MSO2012 DPO2012 | MSO2014 DPO2014 | MSO2024 DPO2024 |
|---|
| Input Channels | 2 | 4 | 4 |
| Analog Bandwidth*1 (-3 dB) | 100 MHz | 100 MHz | 200 MHz |
| Calculated Rise Time | 3.5 ns | 3.5 ns | 2.1 ns |
| Hardware Bandwidth Limits | 20 MHz |
| Input Coupling | AC, DC, GND |
| Input Impedance | 1 MΩ ±2%, 11.5 pF ±2 pF |
| Input Sensitivity Range | 2 mV/div to 5 V/div |
| Vertical Resolution | 8 bits |
| Max Input Voltage | 300 VRMS with peaks ≤450 V |
| DC Gain Accuracy (with offset set to 0 V) | ±3% for 10 mV/div to 5 V/div, ±4% for 2 mV/div to 5 mV/div |
| Offset Range |
| | 2 mV/div to 200 mV/div | ±1 V |
| >200 mV/div to 5 V/div | ±25 V |
| Channel-to-Channel Isolation(Any Two Channels at Equal Vertical Scale) | ≥100:1 at ≤100 MHz | ≥100:1 at ≤200 MHz |
*1 Bandwidth is 20 MHz at 2 mV/div, all models
Vertical System – Digital Channels
| | MSO2012 | MSO2014 | MSO2024 |
|---|
| Input Channels | 16 Digital (D15 to D0) |
| Thresholds | Threshold per set of 8 channels |
| Threshold Selections | TTL, CMOS, ECL, PECL, User Defined |
| User Defined Threshold Range | ±20 V |
| Maximum Input Voltage | ±40 V |
| Threshold Accuracy | ±(100 mV + 3% of threshold setting) |
| Maximum Input Dynamic Range | 80 Vpk-pk (threshold setting dependent) |
| Minimum Voltage Swing | 500 mVpk-pk |
| Input Impedance | 101 kΩ |
| Probe Loading | 8 pF |
| Vertical Resolution | 1 bit |
Horizontal System – Analog Channels
| | MSO2012DPO2012 | MSO2014DPO2014 | MSO2024DPO2024 |
|---|
| Maximum Sample Rate (all channels) | 1 GS/s |
| Minimum Peak Detect Pulse Width | 7.0 ns | 3.5 ns |
| Maximum Record Length (all channels) | 1 M points |
| Maximum Duration of Time Captured at Highest Sample Rate (all channels) | 1 ms |
| Timebase Range | 4 ns to 100 s | 2 ns to 100 s |
| Timebase Delay Time Range | -10 div to 5000 s |
| Channel-to-Channel Deskew Range | ±100 ns |
| Timebase Accuracy | ±25 ppm |
Horizontal System – Digital Channels
| | MSO2012 | MSO2014 | MSO2024 |
|---|
| Maximum Sample Rate (when using any of channels D7-D0) | 1 GS/s (1 ns resolution) |
| Maximum Sample Rate (when using any of channels D15-D8) | 500 MS/s (2 ns resolution) |
| Maximum Record Length | 1 M points |
| Minimum Detectable Pulse Width | 5 ns |
| Channel-to-Channel Skew | 2 ns typical |
Acquisition Modes
Sample - Acquires sampled values
Peak Detect - Captures glitches as narrow as 3.5 ns at all sweep speeds
Averaging - From 2 to 512 waveforms included in average
Roll - Scrolls waveforms right to left across screen at sweep speeds slower than or equal to 40 ms/div
Trigger System
Main Trigger Modes - Auto, Normal, and Single
Trigger Coupling - DC, HF reject (attenuates >85 kHz), LF reject (attenuates <65 kHz), noise reject (reduces sensitivity)
Trigger Holdoff Range - 20 ns to 8 s
Trigger Signal Frequency Counter - Provides a higher accuracy means of identifying the frequency of trigger signals. Trigger Signal Frequency counter resolution is 6 digits.
Sensitivity
Internal DC Coupled
| Trigger Source | Sensitivity |
|---|
| Analog Inputs | 0.4 division from DC to 50 MHz |
| 0.6 divisions >50 MHz to 100 MHz |
| 0.8 divisions >100 MHz to 200 MHz |
| External (Auxiliary Input) | 200 mV from DC to 100 MHz, 1x attenuation |
Trigger Level Range
Any Channel - ±4.92 divisions from center of screen
External (auxiliary input) - ±6.25V, 1x attenuation; ±12.5V, 10x attenuation
Trigger Modes
Edge - Positive or negative slope on any channel or front-panel auxiliary input. Coupling includes DC, HF reject, LF reject, and noise reject.
Pulse Width - Trigger on width of positive or negative pulses that are >, <, =, or ≠ to a specified period of time.
Runt - Trigger on a pulse that crosses one threshold but fails to cross a second threshold before crossing the first again.
Logic - Trigger when any logical pattern of channels goes false or stays true for specified period of time. Any input can be used as a clock to look for the pattern on a clock edge. Pattern (AND, NAND) specified for all analog and digital input channels defined as High, Low, or Don’t Care.
Setup and Hold - Trigger on violations of both setup time and hold time between clock and data present on any of the input channels.
Rise/Fall Time - Trigger on pulse edge rates that are faster or slower than specified. Slope may be positive, negative, or either.
Video - Trigger on line number, all lines, odd, even, or all fields on NTSC, PAL, and SECAM video signals.
I2C (Optional) - Trigger on Start, Repeated Start, Stop, Missing ACK, Address (7 or 10 bit), Data, or Address and Data on I2C buses up to 3.4 Mb/s.
SPI (Optional) - Trigger on SS, Idle Time, MOSI, MISO, or MOSI and MISO on SPI buses up to 10.0 Mb/s.
CAN (Optional) - Trigger on Start of Frame, Frame Type (data, remote, error, overload), Identifier (standard or extended), Data, Identifier and Data, End of Frame, Missing ACK, or Bit Stuffing Errors on CAN signals up to 1 Mb/s. Data can be further specified to trigger on ≤, <, =, >, ≥ or ≠ a specific data value. User-adjustable sample point is set to 50% by default.
RS-232/422/485/UART (Optional) - Trigger on Tx start bit, Rx start bit, Tx end of packet, Rx end of packet, Tx data, Rx data, Tx Parity Error, and Rx Parity Error.
LIN (Optional) - Trigger on Sync, Identifier, Data, Identifier and Data, Wakeup Frame, Sleep Frame, or Errors such as Sync Parity or Checksum Errors.
Parallel (available on MSO models only) - Trigger on a parallel bus data value.
Waveform Measurements
Cursors - Waveform and Screen
Automatic Measurements - 29, of which up to four can be displayed on screen at any one time. Measurements include Frequency, Period, Delay, Rise Time, Fall Time, Positive Duty Cycle, Negative Duty Cycle, Positive Pulse Width, Negative Pulse Width, Burst Width, Phase, Positive Overshoot, Negative Overshoot, Peak to Peak, Amplitude, High, Low, Max, Min, Mean, Cycle Mean, RMS, Cycle RMS, Positive Pulse Count, Negative Pulse Count, Rising Edge Count, Falling Edge Count, Area, and Cycle Area
Gating - Isolate the specific occurrence within an acquisition to take measurements, using either the screen or waveform cursors
Waveform Math
Arithmetic - Add, subtract, and multiply waveforms
Software
NI LabVIEW SignalExpress™ Tektronix Edition LE - A fully interactive measurement software environment optimized for the MSO2000/DPO2000 Series, enables you to instantly acquire, generate, analyze, compare, import, and save measurement data and signals using an intuitive drag-and-drop user interface that does not require any programming. Standard MSO2000/DPO2000 Series support for acquiring, controlling, viewing, and exporting your live signal data is permanently available through the software. The full version (SIGEXPTE) adds additional signal processing, advanced analysis, mixed signal, sweeping, limit testing, and user-defined step capabilities and is available for a 30-day trial period standard with each instrument
OpenChoice® Desktop - Enables fast and easy communication between a Windows PC and the MSO2000/DPO2000 Series, using USB or LAN. Transfer and save settings, waveforms, measurements, and screen images
IVI Driver - Provides a standard instrument programming interface for common applications such as LabVIEW, LabWindows/CVI, Microsoft .NET and MATLAB
Display Characteristics
Display Type - 7 in (180 mm) liquid crystal TFT color display
Display Resolution - 480 horizontal x 234 vertical pixels (WQVGA)
Waveform Styles - Vectors, Dots (In Video Trigger mode), Variable Persistence, Infinite Persistence
Graticules - Full, Grid, Cross Hair, Frame
Format - YT and XY
Waveform Capture Rate - Up to 5,000 wfms/sec
Input/Output Ports
USB 2.0 High-Speed Host Port - Supports USB data storage devices and keyboards
USB 2.0 High-Speed Device Port - Rear-panel port supports communication/control of oscilloscope by PC and all PictBridge® compatible printers
LAN Port - RJ-45 connector, supports 10/100Base-T (requires DPO2CONN)
GPIB - Adapt USB 2.0 device port to a GPIB port (requires TEK-USB-488)
Video Out Port - DB-15 female connector, connect to show the oscilloscope display on an external monitor or projector (requires DPO2CONN)
Auxiliary Input - Front-panel BNC connector. Input Impedance 1 MΩ ±2%. Max input 300 VRMS with peaks ±450 V
Probe Compensator Output - Front-panel pins, Amplitude 5.0 V, Frequency 1 kHz
Kensington Lock - Rear-panel security slot connects to standard Kensington style lock
PowerSource
Power Source Voltage - 100 to 240 V ±10%
PowerSource Frequency - 45 to 65 Hz (90 to 264 V)360 to 440 Hz (100 to 132 V)
Power Consumption - 80 W maximum
TekVPI External Power Supply (119-7465-xx) - Output voltage: 12 V; Output current: 4.2 A; Power consumption: 50 W
Physical Characteristics
| Dimensions | mm | in |
|---|
| Weight | kg | lb |
|---|
| Height | 180 | 7.1 |
| Width | 377 | 14.9 |
| Depth | 134 | 5.3 |
| Net | 3.6 | 7.9 |
| Shipping | 6.2 | 13.7
|
Rackmount Configuration – 4 U
Cooling Clearance - 50 mm (2 inches) on the left side and rear (when looking at the front of the instrument)
General Characteristics
Environmental
Temperature
Operating - 0 °C to +50 °C
Nonoperating - -40 °C to +71 °C
Humidity
Operating - High: 30 °C to 50 °C, 5% to 60% Relative HumidityLow: 0 °C to 30 °C, 5% to 95% Relative Humidity
Nonoperating - High: 30 °C to 55 °C, 5% to 60% Relative HumidityLow: 0 °C to 30 °C, 5% to 95% Relative Humidity
Altitude
Operating - 3,000 meters (9,843 feet)
Nonoperating - 12,000 meters (39,370 feet)
Random Vibration
Operating - 0.31 GRMS from 5 to 500 Hz, 10 minutes each axis, 3 axes, 30 minutes total
Nonoperating - 2.46 GRMS from 5 to 500 Hz, 10 minutes each axis, 3 axes, 30 minutes total
Regulatory
Electromagnetic Compatibility - 2004/108/EC
Safety - Listed UL61010–1: 2004, CAN/CSA-C22.2 No. 61010.1: 2004;Complies with EN61010–1: 2001,Complies with the Low Voltage Directive 2004/108/EC for Product Safety
Ordering Information
MSO2000 Models
MSO2012 - 100 MHz, 1 GS/s, 1 M record length, 2+16 channel mixed signal oscilloscope
MSO2014 - 100 MHz, 1 GS/s, 1 M record length, 4+16 channel mixed signal oscilloscope
MSO2024 - 200 MHz, 1 GS/s, 1 M record length, 4+16 channel mixed signal oscilloscope
DPO2000 Models
DPO2012 - 100 MHz, 1 GS/s, 1 M record length, 2-channel digital phosphor oscilloscope
DPO2014 - 100 MHz, 1 GS/s, 1 M record length, 4-channel digital phosphor oscilloscope
DPO2024 - 200 MHz, 1 GS/s, 1 M record length, 4-channel digital phosphor oscilloscope
All models include: One P2221 200 MHz, 1x/10x Passive Probe per Analog Channel, User Manual and Translated Front-Panel Overlay, Documentation CD (063-4118-xx), OpenChoice® Desktop Software, NI LabVIEW SignalExpress™ Tektronix Edition LE Software, Calibration certificates document measurement traceability to National Metrology Institute(s) and ISO9001 Quality System Registration, Power Cord, and a three-year warranty. MSO models also include one P6316 16-channel logic probe and accessory kit, and accessory bag (016-2008-xx)
Please specify power plug and manual version when ordering
Recommended Serial Bus Application Modules
DPO2EMBD - Embedded Serial Triggering and Analysis Module. Enables triggering on packet level information on I2C and SPI buses as well as analytical tools such as bus views, packet decoding, search tools, and packet decode tables with timestamp information
DPO2COMP - Computer Serial Triggering and Analysis Module. Enables triggering on packet level information on RS-232/422/485/UART buses as well as analytical tools such as bus views, packet decoding, search tools, and packet decode tables with timestamp information
DPO2AUTO - Automotive Serial Triggering and Analysis Module. Enables triggering on packet level information on CAN and LIN buses as well as analytical tools such as bus views, packet decoding, search tools, and packet decode tables with timestamp information
Options
International Power Plugs
Opt. A0 - North America power.
Opt. A1 - Universal EURO power.
Opt. A2 - United Kingdom power.
Opt. A3 - Australia power.
Opt. A5 - Switzerland power.
Opt. A6 - Japan power.
Opt. A10 - China power.
Opt. A11 - India power.
Opt. A99 - No power cord or AC adapter.
Language Options*1
Opt. L0 - English manual.
Opt. L1 - French manual.
Opt. L2 - Italian manual.
Opt. L3 - German manual.
Opt. L4 - Spanish manual.
Opt. L5 - Japanese manual.
Opt. L6 - Portuguese manual.
Opt. L7 - Simplified Chinese manual.
Opt. L8 - Standard Chinese manual.
Opt. L9 - Korean manual.
Opt. L10 - Russian manual.
Opt. L99 - No manual.
Service Options*2
Opt. C3 - Calibration Service 3 years.
Opt. C5 - Calibration Service 5 years.
Opt. CA1 - Provides a single calibration event, or coverage for the designated calibration interval, whichever comes first.
Opt. D1 - Calibration Data Report.
Opt. D3 - Calibration Data Report 3 years (with Opt. C3).
Opt. D5 - Calibration Data Report 5 Years (with Opt. C5).
Opt. R5 - Repair Service 5 years (including warranty).
Recommended Probes
TAP1500*3 - 1.5 GHz TekVPI single-ended active probe.
TDP0500*3, *5 - 500 MHz TekVPI 42 V differential probe.
TCP0030*3 - 120 MHz TekVPI 30 Ampere AC/DC current probe.
TCP0150*3 - 20 MHz TekVPI 150 Ampere AC/DC current probe.
TCPA300/400*6 - Current measurement system amplifiers.
TCP305 - DC to 50 MHz, 50 A current probe for use with TCPA300.
TCP404XL - DC to 2 MHz, 500 A current probe for use with TCPA400.
P5100 - 2.5 kV, 100X high-voltage passive probe.
P5200 - 1.3 kV, 50X/500X, 25 MHz high-voltage active differential probe.
P5205*3, *4 - 1.3 kV, 100 MHz high-voltage differential probe.
P5210*3, *4 - 5.6 kV, 50 MHz high-voltage differential probe.
ADA400A*3, *4 - 100x, 10x, 1x, 0.1x high-gain differential amplifier.
Recommended Accessories
DPO2CONN - Adds Ethernet (10/100Base-T) and Video Out Port.
Service manual - Order 071-2331-xx (English only).
TPA-BNC*3 - TekVPI to TekProbe BNC Adapter.
TekVPI External Power Supply - Order 119-7465-xx.
TEK-USB-488 - GPIB to USB Adapter.
Digital Probe Leadset (8 Channels) - Order 196-3508-xx.
TEK-DPG*3 - TekVPI Deskew Pulse Generator Signal Source.
Deskew and Calibration Fixture - Order 067-1686-xx.
Rackmount Kit - Order RMD2000. Does not include slide-out rails.
Soft Transit Case and Front Protective Cover - Order ACD2000.
Front Protective Cover - Order 200-5045-xx.
Hard Transit Case - Order HCTEK4321 (Requires ACD2000).
SIGEXPTE - NI LabVIEW SignalExpress™ Tektronix Edition Software (Full Version).
USB Keyboard - Order 119-7083-00.
Soft carrying case with front protective cover for MSO2000 and DPO2000 Series (ACD2000)
Warranty
Three-year warranty covering all parts and labor, excluding probes.
*1 Language options include translated front-panel overlay for the selected language(s)
*2 Probes and accessories are not covered by the oscilloscope warranty and Service Offerings. Refer to the datasheet of each probe and accessory model for its unique warranty and calibration terms
*3 Requires TekVPI external power adapter (119-7465-00); one per oscilloscope
*4 Requires TPA-BNC adapter
*5 Probes terminate into 50 Ω but oscilloscope will automatically adjust to account for 1 MΩ input
*6 Requires 50 Ω feed through termination between the oscilloscope input and the BNC cable